Stand-alone systems for any profile shape
Our RASAMAT products are ideal for single pieces and small batches. After just a short training period they are easy to operate, even by less skilled personnel.
The RASAMAT 2002 will handle asymmetrical profile shapes or short workpieces. Here the workpiece is fed through an aperture cover which can also be changed over within seconds.
Both modules combine maximum workplace safety with flexibility and ultra short set-up times. Depending on the size of the workpiece deburring takes only one to five seconds per endface. Even with small daily volumes the RASAMAT will cover its investment in less than twelve months.
Specialists in the deburring of difficult workpieces
The RASAMAT system can even be adapted for the deburring of awkward and heavy workpieces.
On a transverse feeding table the workpiece is pneumatically clamped. After the deburring process is started by two-handed release buttons, the table moves the profile along the rotating RASAMAT head. Depending on the cross section, all edges are evenly rounded off in between four to twelve seconds.
Technical Specifications| Input power | kW | 1.5 / 2.4 |
| Speed | rpm | 1000 + 1500 |
Workpiece data| Materials |
| steel, stainless steel, aluminium, non-ferrous metals |
| Cross-sections | mm | 20 x 20 to 120 x 120, 20 x 20 to 150 x 150, 10 x 10 to 180 x 450 |
| Deburring time | sec. | sections 1 - 5, heavy workpieces 4 to 12 |
Advantages over circular brushes
Circular brushes are the industry standard for deburring steel tubes and sections. However, they are entirely unsuited for processing aluminium extruded sections. If the workpiece has inner fins, a round brush will be unable to reach the outside areas, resulting in incomplete deburring. Even hollow sections cannot be deburred with round brushes. They damage delicate coatings, as the brush wires strikes the outside edges.
All contours are reached.
No surface marking.
Advantages over plate brushes
Conventional plate brushes rarely produce solid deburring and consistent results. This being due to the centrifugal force driving the brush wires outward and also bending during use. The wire tips no longer have contact with the workpiece, producing either little or incomplete deburring.
Consistent deburring throughout the entire life of the tool,
Longer life and as a result reduced tool costs
Advantages of different bristle types
The type of the brush fill material is selected based on the deburring job. The brush can easily be changed as required, meaning the tool is always adapted precisely to the current workpiece properties and the desired results.
Optimal deburring results
Longer life of the tool
Extremely short deburring time
Advantages of adjustable bristle length
The bristle length on the RASAMAT tool is variable.
Compensating wear of the wire filaments.
Consistent deburring quality throughout the entire life of the brush
Adjustable deburring effect